THIS KIT IS FOR 2WD ONLY!!! IT WILL NOT FIT 4WD MODELS
****** SHIPPING TO LOWER 48 STATES ONLY -- ALL OTHERS MUST CONTACT TO ARRANGE SHIPPING ******
NO PO BOXES, APO, AFO, etc... Unless Prior arrangement is made.
Description:
This kit allows for the lifting of your vehicle 6" in the front and 4" in the rear. READ NOTES BELOW FOR IMPORTANT INFORMATION!!!
Included:
- 1 Set of 3" Cast Lift Spindles
- 1 Set of 4" FABRICATED Rear Lift Blocks With OFFSET Pin ***
- 4 U-Bolts and hardware
- 1 Set of 3" BILLET Aluminum Coil Spacers -- MADE From heavy duty Military Grade Aluminum
NOTE: Using 3" Coil Spacers (Or lift coils) and Spindles is difficult to get proper alignment. It is recommended to use new upper control arms designed for a 3" coil / spacer lift . This will allow you to get proper alignment. If you need the UCA please see our other listings or contact us for more information.
Vehicles:
- 1999 - 2007 Silverado 1500 (2007 models MUST be Classic Body Style) 2WD Only SEE IMPORTANT NOTES BELOW (Especially if you have a Crew Cab)
- 1999 - 2007 Sierra 1500 (2007 models MUST be Classic Body Style) 2WD Only
*** Spindles Require 17" Rims or Larger *** Max Backspacing of 4.625" or else Wheel Spacers will be needed!
Non-HD Only
IMPORTANT NOTES (READ):
- Spindles are 2WD only. Does NOT fit 4WD Models.
- This kit includes the 4" Blocks with the offset pin which is strongly recommended on Crew Cab models.
- Longer Rear Shocks May be required. Please see our other listings or message us if you need the shocks.
- Using 3" Coil Spacers (Or lift coils) and Spindles is difficult to get proper alignment. It is Recommend to use our new upper control arms designed for 3" coils / spacers. This will allow you to get proper alignment.
THIS KIT IS FOR 2WD ONLY!!! IT WILL NOT FIT 4WD MODELS
