16-18 Silverado Sierra 3" / 3" Drop Lowering Spindle KIT STAMPED / ALUM ARMS 3/3

ANG891.44
(No reviews yet) Write a Review
SKU:
263337494162
Condition:
New
Weight:
80.00 LBS
Shipping:
Calculated at Checkout
Brand:
Spindle-Source
Manufacturer Part Number:
Does Not Apply
Other Part Number:
GM17
Placement on Vehicle:
Left
Warranty:
Yes
Year:
2014 2015 2016 2017 2018
Year cont 2:
14 15 16 17 18
Fitment Type:
Performance/Custom
Drop Length:
3" / 3"
Type:
Kit
Included Hardware:
Drop Spindles
Control Arm Type::
Stamped Steel Or Aluminum ONLY -- NO CAST STEEL
fcb_countryOfOrigin:
CN
fcb_hazFlag:
0
fcb_multiCountryOfOrigin:
0
Adding to cart… The item has been added


***Shipping is for Lower 48 States ONLY***
All Others (including PO Boxes) Must contact beforehand to arrange shipping.

To See ALL of our Drop Kits for the 14+ w/ Stamped Steel or Aluminum Arms,  CLICK HERE FOR 2WD KITS  or  CLICK HERE FOR 4WD KITS

Description:
This drop kit allows for lowering your vehicle by 3" - 4" in the front and 3" - 4" in the rear. This kit is adjustable and allows you to achieve a 3/3, 3/4 or 4/4 drop kit.  Your vehicle MUST have Stamped Steel or Aluminum Control Arms. Please see the 2nd picture on this listing to confirm exactly what you are looking for on your vehicle. The drop spindles in this kit will not fit vehicles equipped with CAST Steel control arms. 

Included:
  • 1 Set of 2" Drop Spindles (Fits vehicles with Stamped Steel or Aluminum Control Arms -- See PICTURE)
  • Hardware kit for 17" Rims
  • 1 Set of 1" - 2" Adjustable Shackles -- Shackles come with Rubber Encased Bushings. No Greasing or Squeaking!
  • 7" Rear Axle Flip Kit
  • 1" - 2" Adjustable Lift Hangers
  • 1" - 2" Lowering Coil Relocators (Adjustable to lower 1", 1.5" or 2") 
Vehicles:
  • 2014+ Chevrolet Silverado 1500 4WD with Aluminum Control Arms
  • 2016 - 2018 Chevrolet Silverado 1500 2WD / 4WD  (Stamped Steel or Aluminum Control Arms)
  • 2014+ GMC Sierra 1500 4WD with Aluminum Control Arms
  • 2016 - 2018 GMC Sierra 1500 1500 2WD / 4WD  (Stamped Steel or Aluminum Control Arms)
Important Fitment Information:
  • Vehicles running 17" rims must use the provided hardware kit for installation and some minor trimming for clearance.
  • 4WD models require trimming the upper ball joint stud for clearance 
  • Does NOT Fit vehicles with CAST Steel Control Arms

If you have any questions about your application, please message us first before purchasing!  Thank You!