THIS KIT IS FOR 2WD ONLY (Prerunner)!!! THEY WILL NOT FIT Tacoma 4WD MODELS or 5 Lug Models
SHIPPING PRICE IS FOR LOWER 48 STATES ONLY!!! ALL OTHERS MUST CONTACT BEFORE PURCHASING!
NO PO BOXES!!
NO PO BOXES!!
Description:
This kit allows you to lift the front of your vehicle between 4" - 6.5" and the rear by 4". Using the spindles as the baseline for the lift keeps your same suspension geometry as your stock ride! Adding the Bilstein Shocks just makes it that much better!!! The best and easiest way to lift your 2WD Truck!
Included:
- 1 Set of 4" Lift Spindles. These spindles are E-Coated to give you the best finish and RUST PROTECTION.
- 1 Set of FRONT Extended Length Brake lines. These lines are DOT approved!
- 1 Set of Bilstein 5100 ADJUSTABLE Shocks (BIL24-239370) + Stem Bushing Kit -- Shocks can be set to 4 different heights (Stock, 0.85", 1.75" and 2.5")
- 1 Set of 4" STEEL Rear Lift Blocks
- 2 Sets of U-bolts and hardware
- 1 Set of Extended Length Rear Shocks + Shock Hardware (Stem Bushing Kit + Shock Sleeves)
- 1 Set of Upper Control Arms -- Control arms are designed to help achieve proper alignment. The UCA Come with a high quality GREY Powdercoat Finish!
Vehicles:
- 2005 - 2016 Toyota Tacoma Prerunner (6 Lug ONLY) 2WD ONLY!!
Does NOT Fit 5 Lug Models!!
17" Wheel w/ 4.75" or less Backspacing
+0.75" Track Width per side
2WD vehicles only
Will clear up to a 35" tire (Minor trimming may be required)
+0.75" Track Width per side
2WD vehicles only
Will clear up to a 35" tire (Minor trimming may be required)
Does not include extended rear brake lines.
