THESE SPINDLES ARE FOR 2WD ONLY!!! THEY WILL NOT FIT 4WD MODELS!
Shipping Price listed is for lower 48 states only. All others MUST contact beforehand to arrange shipping. NO PO BOXES!!
This is an adjustable Lift kit using Bilstein struts. The front end can be set at different heights with these struts. The kit is able to be set at either 4.37", 5.07" or 5.78" Front Lift Height. The rear is lifted with blocks and gives 4" of lift.
- 1 Set of 3.5" Lift Spindles. These spindles are E-Coated on the non-machined surfaces to give you the best finish and RUST PROTECTION.
- 1 Set of DOT Approved Extended Brake Lines
- 1 Set of Bilstein Adjustable Struts (Part #: 24-232173)
- 1 Set of 4" Lift Blocks
- Carrier Bearing Spacer Kit
- Rear Brake Line Bracket Kit
- 1 Set of U-bolts and Hardware
- Rear Shocks
- 2007 - 2016 Toyota Tundra 2WD ONLY!!
Min of 18" Rim Required!
18" Wheel w/ 6.5" or less Backspacing
Front Track Width extends by 1" per side
2WD vehicles only
Will NOT fit stock wheels unless wheel spacers are used!
Manufacturer Part Number:
Toyota Tundra 2WD Lift Kit
Placement on Vehicle:
E-Coat Finish on Non-Machined Surfaces
Kit Parts Included:
Extended Brake Lines
Interchange Part Number:
Level Kit Tundra Lift Kit Lift Spindles Tundra
2007 2008 2009 2010 2011 2012 2013 2014
2012 2013 2014 2015 2016
07 08 09 10 11 12 13 14 15 16
Kit or Single Part: