4/4 Lift Kit for 1992-1999 Chevrolet/GMC Suburban 1500 2WD 5.7L V8 - Spindles + Blocks + Shocks

MXN11,490.82
(No reviews yet) Write a Review
SKU:
LK-SUB9299-4-4-GM98-S
Weight:
128.03 LBS
Shipping:
Calculated at Checkout
Product Brand:
Spindle-Source
Manufacturer Part Number:
LK-SUB9299-4-4-GM98-S
Placement on Vehicle:
Front, Rear
Year:
1992 1993 1994 1995 1996 1997 1998 1999
Front Lift Height:
4 inches
Rear Lift Height:
4 inches
Includes Shocks:
Front and rear shocks
Interchange Part Number:
Does Not Apply
Other Part Number:
Does Not Apply
Included Hardware:
Grade 8 U-Bolts, Nuts, Washers, Shock Mounting Hardware
Number of Doors:
4
Engine:
5.7L V8 Gas
Rotor Thickness:
1.25 inch front rotors only
Wheel Requirement:
16 inches or larger

Out of stock

Raise your 1992-1999 Chevrolet/GMC Suburban 1500 2WD 5.7L gasoline V8 with this 4-inch front / 4-inch rear lift kit. The front uses 4-inch lift spindles, while the rear uses lift blocks and the included Grade 8 U-bolt set. This version includes all four shocks and mounting hardware.

4-door 2WD only. 5.7L gasoline V8. Measure the front rotor: approximately 1.25-inch thickness required.

Vehicle fitment

  • 1992-1999 Chevrolet C1500 Suburban 2WD
  • 1992-1999 GMC C1500 Suburban 2WD

Fitment notes

  • 1992-1999 Chevrolet/GMC Suburban 1500 (C1500) with 2WD and coil-spring front suspension. Does not fit K1500 or Suburban 2500. Does not fit 4WD/AWD, pickups or compact Blazer/Jimmy. Confirm body style before ordering.
  • This release covers 5.7L gasoline V8 applications. Diesel applications require a separate fitment review and are not included.
  • Spindle kits fit approximately 1.25-inch-thick front rotors only, not 1-inch rotors. Measure before ordering. Minimum 16-inch wheels; verify wheel/tire clearance. Front track width increases approximately 1 inch per side.
  • Professional installation and wheel alignment are required. Remove the factory alignment knockouts to permit fine adjustment. Check steering, suspension, brake-hose and ABS-wire clearance through the full range of motion.
  • Grade 8 U-bolts, nuts and washers are included. Check the spring/plate stack, thread and clearance before tightening; bolts may need shortening. Lift amounts are approximate and vary with spring condition, equipment and load.
  • Includes two front and two rear shocks with the specified mounting hardware. Confirm mount fit and full suspension travel during installation.
  • Maximum wheel backspacing is 4.5 inches. Confirm wheel, tire and suspension clearance before use.

Items included

  • Pair of 4-inch front lift spindles — 1.25-inch rotor application
  • Pair of 4-inch rear lift blocks
  • 4 Grade 8 U-bolts
  • 8 U-bolt nuts
  • 8 U-bolt washers
  • 2 front shocks (SCL0041)
  • 2 rear shocks (LCL0092)
  • 2 front BP25 bar pins; 2 rear BP285 bar pins
  • 2 SHSL15 sleeves; 2 stem mounting-hardware kits

Related kits and accessories