2/1 Lift Kit for 1992-1999 Chevrolet/GMC Suburban 1500 2WD 5.7L V8 - Coil Spacers + Blocks

NZD243.66
(No reviews yet) Write a Review
SKU:
LK-SUB9299-2-1-CS-N
Weight:
22.26 LBS
Shipping:
Calculated at Checkout
Product Brand:
Spindle-Source
Manufacturer Part Number:
LK-SUB9299-2-1-CS-N
Placement on Vehicle:
Front, Rear
Year:
1992 1993 1994 1995 1996 1997 1998 1999
Front Lift Height:
2 inches
Rear Lift Height:
1 inches
Includes Shocks:
No shocks included
Interchange Part Number:
Does Not Apply
Other Part Number:
Does Not Apply
Included Hardware:
Grade 8 U-Bolts, Nuts, Washers
Number of Doors:
4
Engine:
5.7L V8 Gas
Rotor Thickness:
Factory spindles retained

Out of stock

Raise your 1992-1999 Chevrolet/GMC Suburban 1500 2WD 5.7L gasoline V8 with this 2-inch front / 1-inch rear lift kit. The front uses coil spacers, while the rear uses lift blocks and the included Grade 8 U-bolt set. This base version lets you select shocks separately.

4-door 2WD only. 5.7L gasoline V8.

Vehicle fitment

  • 1992-1999 Chevrolet C1500 Suburban 2WD
  • 1992-1999 GMC C1500 Suburban 2WD

Fitment notes

  • 1992-1999 Chevrolet/GMC Suburban 1500 (C1500) with 2WD and coil-spring front suspension. Does not fit K1500 or Suburban 2500. Does not fit 4WD/AWD, pickups or compact Blazer/Jimmy. Confirm body style before ordering.
  • This release covers 5.7L gasoline V8 applications. Diesel applications require a separate fitment review and are not included.
  • Professional installation and wheel alignment are required. Remove the factory alignment knockouts to permit fine adjustment. Check steering, suspension, brake-hose and ABS-wire clearance through the full range of motion.
  • Aftermarket upper control arms are recommended with 2-3-inch front coil-spacer lifts. Upper control arms are not included. Verify bump-stop clearance and shock travel at full compression and extension.
  • Grade 8 U-bolts, nuts and washers are included. Check the spring/plate stack, thread and clearance before tightening; bolts may need shortening. Lift amounts are approximate and vary with spring condition, equipment and load.
  • Shocks are not included. Select shocks appropriate for the coil-spacer and rear-block lift; spindle-only front lift retains stock-length front shocks.

Items included

  • Pair of front coil spacers — 2-inch nominal lift
  • Pair of 1-inch rear lift blocks
  • 4 Grade 8 U-bolts
  • 8 U-bolt nuts
  • 8 U-bolt washers

Related kits and accessories