Raise your 1988-1998 Chevrolet/GMC C1500 pickups with 2WD with this Spindle-Source 3-inch front / 1-inch rear lift kit. The front uses 3-inch front coil spacers, while the rear uses 1-inch lift blocks and the included Grade 8 U-bolt set. This base version lets you select shocks separately.
Vehicle fitment
- 1988-1998 Chevrolet C1500 2WD
- 1988-1998 GMC C1500 2WD
Fitment notes
- For Chevrolet/GMC C1500 pickups with 2WD coil-spring front suspension. Does not fit 4WD or C2500 models. Professional installation and a wheel alignment are required.
- Check steering, suspension, brake-hose and ABS-wire clearance through the full range of motion before use. Factory alignment knockouts must be removed to allow fine adjustment during alignment.
- Aftermarket upper control arms are recommended with 2-3-inch front coil-spacer lifts. Upper control arms are not included. Lift amounts are approximate and vary with the vehicle, spring condition, equipment and load.
- Grade 8 U-bolts, nuts and washers are included. Check the spring/plate stack, available threads and installed clearance before tightening. U-bolts may need to be shortened for the application. Shocks are not included in the base kit.
- Check shock travel and select shocks appropriate for the front suspension and rear lift.
Items included
- Front coil spacer pair (3-inch nominal lift)
- 1-inch rear lift block pair
- 4 Grade 8 U-bolts
- 8 U-bolt nuts
- 8 U-bolt washers
