7/4 Lift Kit for 1988-1998 Chevy GMC C2500 2WD 6 Lug 1.25" Rotors - Spindles + Coil Spacers + Blocks

NZD931.58
(No reviews yet) Write a Review
SKU:
LK-C2500-8898-7-4-GM98-N
Weight:
117.13 LBS
Shipping:
Calculated at Checkout
Product Brand:
Spindle-Source
Manufacturer Part Number:
LK-C2500-8898-7-4-GM98-N
Placement on Vehicle:
Front, Rear
Year:
1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998
Front Lift Height:
7 inches
Rear Lift Height:
4 inches
Includes Shocks:
No shocks included
Interchange Part Number:
Does Not Apply
Other Part Number:
Does Not Apply
Included Hardware:
Grade 8 U-Bolts, Nuts, Washers
Cab Size::
Standard / Extended Cab
Rotor Thickness:
1.25 inch front rotors only
Wheel Requirement:
16 inches or larger

Out of stock

This 7-inch front / 4-inch rear lift kit is for 1988-1998 Chevrolet and GMC C2500 2WD six-lug pickups. Shocks are available separately or in the matching four-shock kit.

Six-lug C2500 2WD pickups only. If your truck has overload springs, please contact us before ordering to confirm the correct U-bolts.

Vehicle fitment

  • 1988-1998 Chevrolet C2500 6 Lug 2WD
  • 1988-1998 GMC C2500 6 Lug 2WD

Fitment notes

  • For 1988-1998 Chevrolet/GMC C2500 2WD six-lug pickups with factory coil-spring front suspension. Does not fit eight-lug trucks, 4WD or Suburban/SUV applications.
  • Requires approximately 1.25-inch-thick front brake rotors. Confirm six-lug 2WD fitment and measure the rotor before ordering. Does not fit the 1-inch light-duty brake system.
  • If your truck has overload springs, please contact us before ordering to confirm the correct U-bolts.
  • Professional installation and wheel alignment required. Factory alignment knockouts must be removed to fine-tune alignment. Check steering, brake-hose, ABS-wire and suspension clearance through the full range of motion.
  • Lift amounts are approximate and vary with spring condition, equipment and load. Grade 8 U-bolts, nuts and washers are included; bolts may need shortening for installed clearance.
  • Requires 16-inch or larger wheels with no more than 4.5-inch backspacing. Front track width increases approximately 1 inch per side. Check wheel and tire clearance before installation.
  • Aftermarket upper control arms are recommended for 2-3-inch coil-spacer lifts. Upper arms are not included. Verify alignment and suspension travel before use.
  • Check driveline angle, brake-hose travel and carrier-bearing requirements where equipped; added corrective parts are not included unless listed.
  • Shocks are not included. Select shocks for the actual front coil-spacer lift and rear block height; spindle lift alone does not change front shock length.

Items included

  • Left and right 4-inch lift spindles
  • Front coil spacer pair (3-inch nominal lift)
  • 4-inch rear lift block pair
  • 4 Grade 8 U-bolts
  • 8 U-bolt nuts
  • 8 U-bolt washers

Related kits and accessories