5/2 Lift Kit for 1988-1998 Chevy GMC C2500 2WD 6 Lug 1.25" Rotors - Spindles + Coil Spacers + Blocks + Shocks

AED2,198.52
(No reviews yet) Write a Review
SKU:
LK-C2500-8898-5-2-GM98-S
Weight:
117.30 LBS
Shipping:
Calculated at Checkout
Product Brand:
Spindle-Source
Manufacturer Part Number:
LK-C2500-8898-5-2-GM98-S
Placement on Vehicle:
Front, Rear
Year:
1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998
Front Lift Height:
5 inches
Rear Lift Height:
2 inches
Includes Shocks:
Front and rear shocks
Interchange Part Number:
Does Not Apply
Other Part Number:
Does Not Apply
Included Hardware:
Grade 8 U-Bolts, Nuts, Washers, Shock Mounting Hardware
Cab Size::
Standard / Extended Cab
Rotor Thickness:
1.25 inch front rotors only
Wheel Requirement:
16 inches or larger

Out of stock

This 5-inch front / 2-inch rear lift kit is for 1988-1998 Chevrolet and GMC C2500 2WD six-lug pickups. Includes matched front and rear shocks.

Six-lug C2500 2WD pickups only. If your truck has overload springs, please contact us before ordering to confirm the correct U-bolts.

Vehicle fitment

  • 1988-1998 Chevrolet C2500 6 Lug 2WD
  • 1988-1998 GMC C2500 6 Lug 2WD

Fitment notes

  • For 1988-1998 Chevrolet/GMC C2500 2WD six-lug pickups with factory coil-spring front suspension. Does not fit eight-lug trucks, 4WD or Suburban/SUV applications.
  • Requires approximately 1.25-inch-thick front brake rotors. Confirm six-lug 2WD fitment and measure the rotor before ordering. Does not fit the 1-inch light-duty brake system.
  • If your truck has overload springs, please contact us before ordering to confirm the correct U-bolts.
  • Professional installation and wheel alignment required. Factory alignment knockouts must be removed to fine-tune alignment. Check steering, brake-hose, ABS-wire and suspension clearance through the full range of motion.
  • Lift amounts are approximate and vary with spring condition, equipment and load. Grade 8 U-bolts, nuts and washers are included; bolts may need shortening for installed clearance.
  • Requires 16-inch or larger wheels with no more than 4.5-inch backspacing. Front track width increases approximately 1 inch per side. Check wheel and tire clearance before installation.

Items included

  • Left and right 4-inch lift spindles
  • Composite front coil spacer pair (1-inch nominal lift)
  • 2-inch rear lift block pair
  • 4 Grade 8 U-bolts
  • 8 U-bolt nuts
  • 8 U-bolt washers
  • 2 front shocks
  • 2 rear shocks
  • Front and rear shock mounting hardware

Related kits and accessories