Product Description:
3-inch front / 6-inch rear lowering kit for 1994-1997 Mazda B3000 / B4000 2WD. V6 engine application. Front and rear shocks included.
Front 3 in / rear 6 in; V6; Front and rear shocks; C-notch included
Items Included:
- Front lowering coil springs (pair)
- Rear axle flip kit (saddles and spring plates)
- Rear adjustment shackles (pair)
- C-notch kit with mounting hardware and bump stops
- Front lowering shocks (x2)
- Rear lowering shocks (x2)
- Shock mounting sleeves (x4)
- Front shock mounting hardware (2 sets)
Vehicle Fitment:
- 1994-1997 Mazda B3000 2WD
- 1994-1997 Mazda B4000 2WD
Vehicle Fitment Notes:
- Fits 1994-1997 Mazda B3000/B4000 2WD gasoline pickups with a V6 engine.
- V6 engine application only. See related kits for the other engine option.
- Does NOT fit 4WD models or pre-1994 Mazda B2200/B2600 trucks.
- Lowering is measured from standard factory ride height. Worn springs, existing modifications and vehicle equipment can change the actual reduction.
- Professional alignment required after lowering. Camber/caster correction bushings may be needed and are not included. Consult a shop experienced with Ford/Mazda Twin I-Beam suspension before installation.
- U-bolts are not included. See related products for the required compatible U-bolt set.
- Extended-cab models with a two-piece driveshaft may need carrier-bearing correction if driveline vibration occurs after lowering.
- A C-notch is recommended for a 6-inch rear drop.
- A C-notch and its supplied hardware are included.
Related SKUS (if any):
Same kit without shocks
Same kit without C-notch
Same drop for 4-cylinder
Required flip-kit U-bolts — sold separately
Shackle Hardware Kit (recommended)
Mazda B3000 / B4000 2WD 94, 95, 96, 97
Mazda B3000 / B4000 2WD 1994, 1995, 1996, 1997
