Product Description:
3-inch front / 5-inch rear lowering kit for 1998-2009 Mazda B-Series 2WD. Coil-spring front suspension; FIRST SPR character 2/A/C/J. Shocks sold separately.
Front 3 in / rear 5 in; SPR 2/A/C/J; No shocks included; C-notch included
Items Included:
- Front lowering coil springs (pair)
- Rear axle flip kit (saddles and spring plates)
- C-notch kit with mounting hardware and bump stops
Vehicle Fitment:
- 1998-2001 Mazda B2500 2WD
- 2001-2009 Mazda B2300 2WD
- 1998-2007 Mazda B3000 2WD
- 1998-2000 Mazda B4000 2WD
Vehicle Fitment Notes:
- Fits 1998-2009 Mazda B-Series 2WD gasoline/flex-fuel pickups with coil-spring front suspension.
- The FIRST SPR character must be one of: 2, A, C, J. Select coils by spring code, not engine size alone.
- Does NOT fit 4WD, torsion-bar suspension or Dual Sport models, including 2WD Dual Sport.
- Troy Lee Edition fitment is not included in this listing.
- Lowering is measured from standard factory ride height. Worn springs, existing modifications and vehicle equipment can change the actual reduction.
- Professional wheel alignment required after installation.
- U-bolts are not included. See related products for the required compatible U-bolt set.
- Extended-cab models with a two-piece driveshaft may need carrier-bearing correction if driveline vibration occurs after lowering.
- A C-notch is optional for a 5-inch rear drop.
- A C-notch and its supplied hardware are included.
Related SKUS (if any):
Same kit with front and rear shocks
Same kit without C-notch
Same drop for SPR 3
Same drop for SPR D/E
Required flip-kit U-bolts — sold separately
Mazda B2500 / B2300 / B3000 / B4000 2WD 98, 99, 00, 01
Mazda B2500 / B2300 / B3000 / B4000 2WD 1998, 1999, 2000, 2001
