Description:
This kit allows for the lowering the FRONT of your vehicle either 3", 3.5" or 4".
Front:
2" Lowering Spindles
1" - 2" ADJUSTABLE Lowering Strut Spacer / Strut Relocators: This allows you to use your factory struts / coils without having to replace them.
SEE PICTURE ABOVE FOR BASIC STEPS TO INSTALL LOWERING SPACER:
1) Remove Strut from Vehicle. Remove Coil.
2) Disassemble front strut as shown.
3) Install Lowering Strut Spacer. Using the spacer body alone (With no Rings) and the Lowering Spindle will give a 4" Drop.
4) Each ring = 1/2" of Lift. Using both rings and the Spindle would leave you with a 3 inch drop.
Included:
- 1 Set of Cast 2" Lowering Drop Spindles (L+R)
- 1 Set of Adjustable Strut Spacers / Coil Relocators
Vehicles:
- 2007 - 2016 Silverado
- 2007 - 2016 Sierra 1500
- 2007 - 2010 Sierra Denali
- 2007 - 2014 GMC Yukon
- 2007 - 2014 GMC Yukon XL 1500
- 2007 - 2014 Chevy Tahoe
- 2007 - 2014 Chevy Suburban 1500
- 2007 - 2014 Avalanche 1500
- 2007 - 2014 Cadillac Escalade
Fits 2WD / 4WD / AWD!! NON-HD Models Only. Does NOT fit the 2014+ models with the Aluminum Spindles
Min 17" Rims Required. When using 17" rims, it is required to trim the lower ball joint stud and modify the lower ball joint nut.
Or you can purchase a modified nut from here: Click Here for the Necessary Hardware Kit
***Thanks and Please Ask All Questions Before Purchasing***
